Building a 90 SN REAR SEAT

[dtbrown]

I purchased a '90 SN with no back seat. I took measurements from another '90 SN and I have already built the base, with a 12" sub built in. My next step is to build the back seat. I am looking for any pictures of current '90 SN backrests. Not sure how the unit is secured to the boat, as well as the general dimensions. I have ideas of how to go about this project, but I would appreciate some guidance.

Thank You.

[M3Fan]

The 90 rear seat is one piece of (HEAVY) injection molded plastic. The back and bottom are one solid piece. I have nearly thrown my whole back out getting this seat in and out of the boat. Gravity holds the entire seat unit there, along with one (pointy) metal bracket on the back and the indentations on the gunnel that keep it in place. I have pics that I can post when I get home tonight. I would make your seat the same way- all one piece.

[M3Fan]

Pics

[M3Fan]

Seat

[dtbrown]

rear seat picture

I appreciate M3FAN's pictures. I am looking for one last picture. That is of the back of the rear seat. I am trying to envision how the seat is afixed to the metal bracket on the boat that I see in the pictures.

[mgswed]

RE: rear seat picture

Hey dtbrown, I sent you a picture. Did that help at all? -MG