Which boat for Tallredrider?

[Tallredrider]

Poll: pick your favorite! I gathered some ideas from another thread, and it was suggested by several to just leave it to a vote, rather than keeping options wide open.

I chose this sticker because I will actually remove the sticker and keep the letters: 'Super Air Nautique'. I think that will make it look cleaner. On a side note, the dealer told me I can't order it with just 'super air nautique' on the side because they use the sticker to line it up. So the sticker has to be installed to line up the letters properly. The new 'shattered diamond' sticker will have more small pieces to remove and be a real PIA. Plus I didn't like it as much, which I guess is what this is really about.

Just realized I forgot board racks on boat #3...oops.

[MLA]

#2 needs white tower
#3 is not bad
#1 is my fav out of these

[josemolino]

I love number 3. Mine is the same but in orange. You will never get fed up of a simple combination and it´s easier to maintain with no flake...

[JoeA]

Boat #1 is my choice. Try seeing what it looks like with a white tower, unless you already have.

[Tallredrider]

I love number 3. Mine is the same but in orange. You will never get fed up of a simple combination and it´s easier to maintain with no flake...

Jose, got a picture?

[nyryan2001]

Tall, I just played with the boat builder for 30 mins... Red, gray, white and black colors. These are the 3 that would share. Last one being my top choice.

On a side note... I would tell you not to worry about a colored hull. Trailers fit them near perfectly, no marks 250hrs in now between my two, now with a black hull.

[scottb7]

I like # 1, but frankly I would put the gray in front of the star as well as behind it. All the rest are a bit plain too me.

[EchoLodge]

My boat lives in a hot environment and dark colors cause bad water spots. I like #3 with a white tower as red would fade in my neck of the woods!

[seth]

#3 for sure! Can you do the red in red metal flake?? Thats what I would do.

[NautiqueJeff]

Can't do the red in #3 in metal flake. They don't allow metal flake on the accent stripes.

[Tallredrider]

My boat lives in a hot environment and dark colors cause bad water spots. I like #3 with a white tower as red would fade in my neck of the woods!

Your neck of the woods, might be my neck of the woods? Echo Bay on Lake Mead?

I think a pink tower in a few years would look pretty awesome! Good thought.

[aoblak]

I like 3 but with a red interior floor

[seth]

There must be a reason they dont do metal flake accent stripes? I was talking to Greg Dick a few years ago and he was saying how they were building a black deck G23 for somebody when they normally wouldnt. So maybe you could ask them to do it special order.

[NautiqueJeff]

There is a reason. The metal flake discolors if it sits in the water for long periods of time. That's why the 2014 PN G23 only had metal flake on the top accent and not the bottom.

[Tallredrider]

[ATTACH]n445516[/ATTACH]
.

It is the one from post #11. Despite my best efforts, my work's browser from 1995 won't allow me to copy or paste or upload.

Here is what I chose. Mostly white interior with red piping and faux teak. The order has been officially placed. Now I wait. White Boatmate trailer as well with Chrome rims. The days of black rims are nearing the end of that fashion trend IMHO. I think this boat will have 'clean' written all over it.

End of February or early March I am told, although it seems that many on this board might be better able to tell me where the build process is at right now. Although I did not choose the most popular, I appreciate everyone's opinion. Of course, I might be able to change my mind for a few weeks yet.