Tweet
So - I did the WakeMakers piggyback setup this weekend - all said, it took 20 minutes to install, and I could *not* be happier with the end product - one pump to do it all is amazingly convenient, and I'm probably going to get another one for the sack that's going into my ski locker, too!
Here's the question, though:
I have a battery that sits at the front of each ski locker. When I fill the sack, it wants to lay forward and to the left, with water filling the sack next to the battery, then eventually filling and pressing (rather hard) against my ballast pump. I was wondering if anybody had taken a small piece of wood (or something) and laid it across the top of the battery box to help keep things a bit more snug fitting?
Here's the question, though:
I have a battery that sits at the front of each ski locker. When I fill the sack, it wants to lay forward and to the left, with water filling the sack next to the battery, then eventually filling and pressing (rather hard) against my ballast pump. I was wondering if anybody had taken a small piece of wood (or something) and laid it across the top of the battery box to help keep things a bit more snug fitting?