FTC1 Tower lower left legs wanted

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • municipalfinanceguy
    • Dec 2008
    • 12



    FTC1 Tower lower left legs wanted

    I need the lower left legs of an FTC1 Tower from a 210 from 2002 to 2005. I noticed yesterday a crack just above the weld on the front left leg. I need just the front leg, at least 10 inches of leg and the foot, or the whole left lower "hoop" with both legs and feet. Anyone have remains of an old or damaged tower? Prefer black, but not fussy, as I have a kids camp to teach in two weeks. Crack is too close to the foot for a quick repair.

    Thanks all, fr Toronto, Canada

  • jward
    Senior Member of PLANETNAUTIQUE
    • Feb 2008
    • 620

    • Sweet Home Alabama

    • 03 SANTE 04 SANTE

    #2
    If I were you I'd just take it off and take it to a weld shop that does aluminum and get them to weld it back up. The chances of you finding just the lower is extremely slim.

    Comment

    • beach
      • Jul 2010
      • 245

      • Alabama

      • 2003 SAN 210

      #3
      You could contact New Dimension Towers. They make a replica FCT that might work. I'm not sure how interchangeable the parts are on the towers.

      Comment

      • NautiDave07
        • Mar 2008
        • 333

        • Louisville KY

        • 00 SAN210 07 236 TE

        #4
        I had this happen on my 00 super air. It cracked right above the weld and peeled open. As if the foot was in a bit of a bind and just fatigued over time. I took it to a welder and they welded it right up. $20 and I colored it with a black sharpie marker and I was good as new. Just too had to take top off of tower to remove the leg and took it to him.
        00 SAN 210 (previous boat)
        07 236 te sold

        Comment

        Working...
        X