Tweet
I am about to install my Star Gazer Perfect Pass this weekend. And I have a question (or two) for anyone that his done this on a GT40 2001 with the stock Speedo and Tack replaced.
My current Hours read 95ish hours(tack), when I got the boat 3 years ago, the dealership told me that boat had 350 hours on it (35 hours on tack replaced at 315).
Should I set the hours to 0.00, or match the current hours (95), or try to match what the dealership told me was on the boat when I got it…. ( 315 plus the current hours of 95 setting it to 410)?
Also, I am guessing that I need 3 wires behind the dash…
RPM Gray
Power Purple (should this be going to the replacement Speedo and Tack?)
Ground Black…
Since my the pickup for current MPH is on a CRAPY place (thanks Omaha marine) I will not be keeping the MPH gauge because it only works at 27 PLUS or with FULL Ballast or 4 or 5 guys in the boat.
SO I should be able to use the Power and Ground from it, and use the 3.5 hole in the dash.
Any tips and input would be great.
My current Hours read 95ish hours(tack), when I got the boat 3 years ago, the dealership told me that boat had 350 hours on it (35 hours on tack replaced at 315).
Should I set the hours to 0.00, or match the current hours (95), or try to match what the dealership told me was on the boat when I got it…. ( 315 plus the current hours of 95 setting it to 410)?
Also, I am guessing that I need 3 wires behind the dash…
RPM Gray
Power Purple (should this be going to the replacement Speedo and Tack?)
Ground Black…
Since my the pickup for current MPH is on a CRAPY place (thanks Omaha marine) I will not be keeping the MPH gauge because it only works at 27 PLUS or with FULL Ballast or 4 or 5 guys in the boat.
SO I should be able to use the Power and Ground from it, and use the 3.5 hole in the dash.
Any tips and input would be great.