Need a quick measurement off an 08-11 210

[swatguy]

Can someone help me out with a quick measurement off a 210. Looking for the seat base height in the cockpit from the floor to the bottom of the cushion on the chase lounge sides or observer base. Thanks.

[Nordicron]

Wow sorry this didn't get updated quicker. I'm seeing 14"

[Nautiquehunter]

On my 08 210 from the fiberglass floor to the bottom of the passengers seat is 8 3/8''.

[swatguy]

Thanks guys. Ron is yours from the outside or the actual depth compartment? Sorry should've been more clear. Was looking for the outside measurement to see what kind of space I had to work with.

Huge difference between 14 and 8 3/8

[Nordicron]

Mine was from floor to cushion top. I can re measure if u need

I shoulda read your post again before measuring!

[swatguy]

Nope all good. Thanks. Trying to see how much room I have to work with for an IB sub. Looking like not even close for a 10inch. Looks like the drivers helm wall as fad back as possible is gonna be only option.

[Nordicron]

Ok height under observer seat is 10.5". Floor to underside of cushion. There is a lip though that would take some of that away if u wanted to go all the way to edge

[Nordicron]

Hunters measurement was from the cabin floor which is higher than the floor that's actually in the storage areas.

[swatguy]

Yup. The outside is what counts because that's where the big part of the basket in the sub will mount to. I am just gonna have to biite the bullet. Get some more power and vent the walkway wall for the sub. Not ideal but best option.

[Paxdad]

Take photos as I am interested in the outcome.