Sewlong storage cover just arrived

[pSchwade]

Yes. Here is a link: http://www.amazon.com/gp/aw/d/B00GKD...eld+over+tower

looks like that one is for a pickle fork nose (PFN), I think you want this one for your 220

http://www.amazon.com/Transhield-Ove...ver+Wake+Tower

[scarbs]

looks like that one is for a pickle fork nose (PFN), I think you want this one for your 220

http://www.amazon.com/Transhield-Ove...ver+Wake+Tower

You're right. Nice catch.

[pSchwade]

I just ordered a 24' x 26' (to cover the platform) I'll post some pics this weekend so you can see how it fits.

[Beg4wake]

I know it's not applicable to everybody's situation as it won't work on docks, or some may not have the space or own their land, and not trying to take away from the use of these covers, but for the same price or less than the Sewlong cover, I had a 24'L x 14'W x 12'H aluminum building built on my land. That included color matched to my house, 3/4 sides, gable on one end, a large amount of sunshade fabric, delivery and set up! Great protection from snow, rain, hail, etc. No maintenance! Just wanted to share in case some may not have given this option a thought. I was actually looking at covers like the Sewlong till I realized I could build this for the same price. It was about $1800 when said and done! (note the pics are before I installed the sunshade on the back end. I didn't get the back fully enclosed because I was afraid of possibly backing the swim platform into it, therefore the fabric works great to block the sun yet remains forgiving!

[ScooterMcgavin]

That Looks great!

[scarbs]

If only I had the space...

[s_kelley2000]

looks like that one is for a pickle fork nose (PFN), I think you want this one for your 220

http://www.amazon.com/Transhield-Ove...ver+Wake+Tower

Anybody try one of these on a 95-06 210/Super Air/Super Sport yet? Think these would work in moderate to heavy snow regions? Trying to decide if I want to deal with the hassle of moving my "portable" CoverIT garage when I move later this year or go with something more like this.

[JoeA]

Does the Transhield allow the boat to breath. Any vents in this cover?

[scarbs]

Does the Transhield allow the boat to breath. Any vents in this cover?

Yes. Two vents on top near middle.

[scarbs]

Anybody try one of these on a 95-06 210/Super Air/Super Sport yet? Think these would work in moderate to heavy snow regions? Trying to decide if I want to deal with the hassle of moving my "portable" CoverIT garage when I move later this year or go with something more like this.

Shawn, I assume your question was in reference to the Transhield cover? If so, I have not tried it on an older 210/SS, but based on my familiarity with my older 210, I can say that the cover should fit the same front-to-back as the lengths of the two models with platform is similar. But because of the narrower beam of the older 210s, the cover will likely cover a lot more of the sides and will probably actually wrap just under the bottoms, which in my opinion is even better.

[pSchwade]

The fabric looks nice and it seems to be made well, but I have a sneaking suspicion that they sent me the wrong cover... Waiting on RMA.

[scarbs]

I just ordered a 24' x 26' (to cover the platform) I'll post some pics this weekend so you can see how it fits.

Pschwade...just an FYI...the cover on my 2012 210 with a S5 up is the 22'-23' cover and it is perfect. Any bigger and I would not be able to tighten it down well. The bigger size may, however, cover the side all the way. I just don't think you'll be able to get it tight.

[McGator83]

So I have a 2005 216 and need a new cover. Do I need the 24 x 22 cover and will that be long enough to go over my tower? Thanks

[scarbs]

I am not familiar with the 216, but assume that it is a 21' 6" boat with 2' swim platform and four-point tower. On my 21' 210 with 2.5' platform, I use the transom ratchet straps on the trailer to pull the draw strings super tight. And when fully cinched, from front to back, the 22' x 24' cover starts at the bow stop, goes over the Z5 and the tower, all the way around the swim platform, and just touches the surf pipe. I estimate that there is about 1'-1.25' of extra material. I suspect that the same cover will work well for your boat.

[vvfdfirefighter]

We should change this thread title to "Transhield Cover Information"