Tweet
I have 2014 SAN G23. I am wondering how to MANUALLY control the NCRS plate when cruising or pulling skier not using speed control. Can this be done?
-
-
Turn off Auto NCRS. Then you can use the NCRS adjustment to put it wherever you want.
But I would recommend leaving Auto NCRS on. Then just use the NCRS adjustment to lower the plate as required. -
I second leaving it in automatic mode. You can get yourself in trouble quickly doing it manually.I own and operate Silver Cove Marine, which is an inboard boat restoration, service, and sales facility located in Mooresville, North Carolina. We specializes in Nautiques and Correct Crafts, and also provide general service for Nautiques fifteen years old and older.
If we can be of service to you, please contact us anytime!
Current Boats —> 2025 Super Air Nautique G23 -- 2001 Ski Nautique -- 2000 Nautique Super Sport PYTHON -- 2000 Nautique Super Sport -- 1999 Ski Nautique PYTHON-- 1985 Sea Nautique 2700 (Twin-Engine, 1 of 13) -- 1981 Fish Nautique (Twin-Engine, 1 of 4) -- 1980 Fish Nautique (Twin-Engine, 1 of 4)
Former Boats —> 2024 Super Air Nautique G23 PARAGON -- 2023 Super Air Nautique G23 -- 2022 Super Air Nautique G23 PARAGON -- 2021 Super Air Nautique G23 -- 2021 Super Air Nautique G23 -- 2020 Super Air Nautique G23 -- 2019 Super Air Nautique G23 -- 2018 Super Air Nautique G23-- 2018 SAN 210 TE -- 2017 Super Air Nautique G23 -- 2016 Super Air Nautique G23 -- 2015 Super Air Nautique G23 -- 2014 Super Air Nautique G23 -- 2014 Super Air Nautique 230 Team Edition — 2013 Super Air Nautique G23 — 2012 Super Air Nautique 210 Team Edition — 2011 Super Air Nautique 210 Team Edition — 2010 Super Air Nautique 210 Team Edition — 2008 Super Air Nautique 230 Team Edition — 2007 Air Nautique 236 Team Edition -- 2007 Air Nautique SV-211 -- 2005 SV-211 -- 2003 Super Air Nautique 210 Team Edition -- 2003 Air Nautique 226 -- 2003 Sport Nautique 216 -- 2003 Ski Nautique 196 -- 2003 Ski Nautique 196-- 2002 Ski Nautique -- 2001 Sport Nautique -- 2001 Ski Nautique -- 2000 Sport Nautique -- 1999 Ski Nautique Open Bow -- 1999 Air Tique 176 -- 1998 Ski Nautique -- 1998 Ski Nautique -- 1998 Ski Nautique -- 1997 Ski Nautique -- 1997 Ski Nautique -- 1996 Ski Nautique Open Bow -- 1994 Ski Nautique -- 1993 Barefoot Nautique -- 1983 Fish Nautique (TWIN ENGINE, 1 of 4) -- 1981 Fish Nautique (SINGLE ENGINE)
Need something for your boat? Please check out our site sponsors! Not only do they offer the best products available, they also support this site.
Silver Cove Marine - NautiqueParts.com - Phoenix Trailers - SkiSafe - PCM Marine Engines - C&S Marine - OJ PropellersComment
-
I don't get any plate movement when turning off and using NCRS adjustment, sounds like I might have some kind of problem. Don't need this often, but nice to have the option when pulling a young kid on kneeboarding or other...
Sent from my iPad using TapatalkComment
-
If I'm not mistaken the plate will not move if the boat is still.
Even with it moving I can't tell much of a difference if I only move one number at a time. If I go three or four at a time it is noticeable.
The biggest, obviously, is right after ZO takes over when riding and it goes from 0 to 5. You can really feel the back drop and the bow come up.Comment
-
This is what I have found to work the best. Leave the NCRS in AUTO on High sensitivity. I have found that when I pull the kids it is best to create a new user or change the settings of the novice wakeboard settings so that the NCRS setting is 0 or 1. (bow low) . Otherwise when the set speed is achieved (sometimes 14-15 mph for the kids) the NRCS plate will go to 5, the bow will rise, the boat will come off plane, then the plate will adjust and compensate and the process goes back and forth with the boats nose going up and down.
When you set up a user setting or create one, it holds the set NCRS setting at the speed choosen. That way you can see over the bow and have a wake that is not washed out even with a slower set speed.
Hope this helps2016 G23Comment
-
Great input, thanks Whitetail. It sounds like that will work for me, but I haven't tried it yet. Have you found you have to be in one of the user setting (like wake novice) with the set speed achieved to be able to gain manual control of the NCRS?Comment
-
i have never realy tried to adjust manual in any setting. I just got super frustrated one day while towing my daughter at 14 mph while she was trying to learn some spins and the bow was going up and down and ncos could not find a place to stay. I just had speed control on with sped set a 14. It would reach 14 then felt like plate was moving, bow would rise, boat would come off plane and you know the rest.
I made a new user with that speed and my own ncrs setting, and all is good.2016 G23Comment
Comment