Phender Pros

[Dave Rittiman]

So question if you didn't order the Phender Pro's on your Boat and were adding them later. Would you do 2 for each side or would you do 3 ? I know if you order them from nautique you get 2 typically. Does anyone have pictures of where they place them on a G23 ?

Phender Pros
http://www.bigskyprecision.com/PhenderPro.php

Phender Pro Video
https://youtu.be/rfEilnOKrdM

Thx
Dave

Sent from my iPhone using PLT Nautique

[Dandy21]

I have been considering adding these to our boat. If I do, I will be adding 3 to each side, one at the widest point of the boat and then one towards the bow, where it starts to curve in and one towards the stern. This way if the boat rolls a bit, it is still protected. I find it interesting that most boats do not have a good tie off at the widest point.

Sent from my VS995 using Tapatalk

[Evening Shade]

So question if you didn't order the Phender Pro's on your Boat and were adding them later. Would you do 2 for each side or would you do 3 ? I know if you order them from nautique you get 2 typically. Does anyone have pictures of where they place them on a G23 ?

Phender Pros
http://www.bigskyprecision.com/PhenderPro.php

Phender Pro Video
https://youtu.be/rfEilnOKrdM

Thx
Dave

Sent from my iPhone using PLT Nautique

Dave,

G23??? Are you asking because it's close to the same size as your Supra or are you getting a G23?

[charlesml3]

So question if you didn't order the Phender Pro's on your Boat and were adding them later. Would you do 2 for each side or would you do 3 ? I know if you order them from nautique you get 2 typically. Does anyone have pictures of where they place them on a G23 ?

My 230 came with 2 on each side and I'm considering adding a third. I just love these things. They put fenders right where I need them leaving my cleats for dock lines.

-Charles

[RTS DC]

I want to add Phendor Pro's. Should I be careful of drilling into anything? Where are they installed when done by the factory? Where are people putting them as DIY?


2016 G23

[wakemaker]

http://www.bigskyprecision.com/PhenderPro.php
get them form here where u want them is where u put them just look under the rail where u drill thats what i am going to do

[GMLIII]

I just got a 2017 G23 and it came with 3 Phender Pro's on each side


Sent from my iPad using PLT Nautique

[Dave Rittiman]

Dave,

G23??? Are you asking because it's close to the same size as your Supra or are you getting a G23?

You caught me just wanted to ask since a G33 is pretty similer in size. It's always hard to drill into your boat I must say had to have a cocktail. Drilled 3 holes per side should work out pretty nice.

Worked out well I went with the black receivers instead of the stainless. The black matches really well and is kinda hidden.








Sent from my iPhone using PLT Nautique

[Dave Rittiman]

Another question are you guys using standard bumpers ? Then using a small piece of rope to your Phender Pro then to the Bumper ?

Looks kinda sketchy with the mental piece just hanging from the end of the rope ? Trying to not have and unnecessary accidents on the gel coat.


Sent from my iPhone using PLT Nautique

[Dave Rittiman]

Btw this is what the Go Pro mount looks like that fits into the Big Sky receivers. You can order the mount directly from Big Sky they are like $59 bucks.




Sent from my iPhone using PLT Nautique

[lakeeriemonster]

Did you guys go with 3/8" or 1/2"? Looks sweet

[Dave Rittiman]

I did the 1/2 on mine.


Sent from my iPhone using PLT Nautique

[Beg4wake]

Yup, 3 on each side on the '16 G23's as well, circled in red...

[nautiques4life]

I'm poor. Bought ones (similar... Round instead of rectangular) like these, put 4 on the boat for under $20 with free shipping. Work great.