Flag Mount

[RTS DC]

I think I may have found an option with which I can work. Anybody know the diameter of the large round tubing on a 2017 near the tower tow point? The stuff down low is "squarish" to accommodate the new strapless racks this year. Thanks.

What did you find?


2016 G23

[RDT-G23]

https://www.bulletlines.com/Wakeboar...lder-p/799.htm

[DLafont]

I think I may have found an option with which I can work. Anybody know the diameter of the large round tubing on a 2017 near the tower tow point? The stuff down low is "squarish" to accommodate the new strapless racks this year. Thanks.

To get the diameter, simply run a string around the tubing and divide that length by (pi). I also believe that bullett lines have a converter on their site somewhere, or at least they used to.

Sent from my LG-H831 using PLT Nautique mobile app

[North Woody]

Reviving this thread as I’m looking for advice on a good flag mount on our ‘20 GS22. I installed this mount on the OZ HD Tower on our 2014 Moomba LSV and it worked great (https://www.onlyinboards.com/Accesso...ag-Holder.aspx). It’s not a great pic, but you can see how it mounts really easily on the 2 1/2” diameter tower, and it swivels to be able to be fit straight up:



Has anyone installed this on a GS tower? Or Has anyone used something better?

[GMLIII]

Big Air Tower flag pole holders. Best flag pole holder in America . Great quality , the best available hands down

[LakesideRec]

Big Air Tower flag pole holders. Best flag pole holder in America . Great quality , the best available hands down

I have the Big Air Flag holder and agree the flag holder itself is pretty good.

However, the flag pole they sell with their holder needs to come with better flag-attaching hardware. Screwing the flag onto the pole with screws is kind of annoying if you have more than one flag to fly or want to use the same flag in other applications.

They should have added something like this:
https://www.banggood.com/Aluminum-Al...r_warehouse=CN

[<ReLax>]

What size Big Air flag pole holder will fit a G23 or G25? Looks like it comes in either a 2-2.5” clamp or a 3” clamp. And where on the G tower is the best place to mount? I can’t find any pics on a G.


Sent from my iPhone using Tapatalk

[GMLIII]

What size Big Air flag pole holder will fit a G23 or G25? Looks like it comes in either a 2-2.5” clamp or a 3” clamp. And where on the G tower is the best place to mount? I can’t find any pics on a G.


Sent from my iPhone using Tapatalk

Get the 3 inch clamp. I placed my flag mount on the top of the rear tower near the all around light. By far the most out of the way mount location. I thought long and hard on mount placement and could not be happier with my choice of flag mount location. Here is a picture of my placement.

[North Woody]

Get the 3 inch clamp. I placed my flag mount on the top of the rear tower near the all around light. By far the most out of the way mount location. I thought long and hard on mount placement and could not be happier with my choice of flag mount location. Here is a picture of my placement.

Looks great. Is there an option to place it somewhere on the vertical part of the tower that doesn’t interfere with the board racks? We keep our 2020 GS22 on a covered hoist so I’m hoping to find a solution that allows me to mount it on the lower portion of the tower so I don’t have to pull it down every time I come into the hoist...

[GMLIII]

Looks great. Is there an option to place it somewhere on the vertical part of the tower that doesn’t interfere with the board racks? We keep our 2020 GS22 on a covered hoist so I’m hoping to find a solution that allows me to mount it on the lower portion of the tower so I don’t have to pull it down every time I come into the hoist...

That is the main reason I placed it where I did. I leave mine on when I raise my in the lift but I have exposed rafters vs a finished lift ceiling

[RDT-G23]

Looks great. Is there an option to place it somewhere on the vertical part of the tower that doesn’t interfere with the board racks? We keep our 2020 GS22 on a covered hoist so I’m hoping to find a solution that allows me to mount it on the lower portion of the tower so I don’t have to pull it down every time I come into the hoist...

Good lookin' tub!

[North Woody]

That is the main reason I placed it where I did. I leave mine on when I raise my in the lift but I have exposed rafters vs a finished lift ceiling

Super, thanks .... order placed just now, can’t wait to get that bad boy installed on our GS22 with our various flags for different activities

[GMLIII]

Super, thanks .... order placed just now, can’t wait to get that bad boy installed on our GS22 with our various flags for different activities

Excellent

[North Woody]

Ok, so I got my BigAir mount and 2’ flag pole delivered this weekend. But it looks like you have to screw your flag into the flag pole, meaning that it’s permanently attached to the flag pole. I like to swap flags, so has anyone found a different flag attachment option to be able to swap flags? I saw these On Banggood referenced earlier in this thread - has anyone used these?

[GMLIII]

Ok, so I got my BigAir mount and 2’ flag pole delivered this weekend. But it looks like you have to screw your flag into the flag pole, meaning that it’s permanently attached to the flag pole. I like to swap flags, so has anyone found a different flag attachment option to be able to swap flags? I saw these On Banggood referenced earlier in this thread - has anyone used these?

https://www.amazon.com/dp/B000MJKJZA/ref=dp_cerb_1

I used the 3/4 flag pole then used some of the left over rubber from the Big Air flag holder which I was not using to fill the void space in the flag holder. Has worked like a charm for 3 years.