Originally posted by thejean
View Post
X
-
Senior Member of PLANETNAUTIQUE
- Apr 2010
- 819
- Lake Winnipesaukee, NH
- 2016 G23, 1999 SN Python Past: 2004 SANTE, 1993 SN
Originally posted by Peteg5 View PostI would be unable upgrade to a future G because of the increased height in tower. While boat is on the water, I need to pass under a bridge where I currently have only a few of inches clearance. When lake is high in beginning of the season I actually have to fill ballast to fit under (2017 G).
If I didn’t have the bridge limitation I must admit though it would be nice to have extra headroom. So I guess ideally for my situation they could put the anchor light/awareness camera on a hinge or some like solution.
Sent from my iPhone using PLT Nautique
Comment
-
Originally posted by G_WaTT View Post
We'll probably find out before I can test it out. I won't be receiving mine till mid August, but I'll be sure to do a write up and answer any questions I'm able to.
Thanks!
-Charles
Comment
-
-
1,000 Post Club Member
- Oct 2014
- 1026
- St. George, Utah
- Red Metal Flake 2016 G23! Malibu 25 LSV 2019 2021 Centurion Ri237
Originally posted by Peteg5 View PostI would be unable upgrade to a future G because of the increased height in tower. While boat is on the water, I need to pass under a bridge where I currently have only a few of inches clearance. When lake is high in beginning of the season I actually have to fill ballast to fit under (2017 G).
If I didn’t have the bridge limitation I must admit though it would be nice to have extra headroom. So I guess ideally for my situation they could put the anchor light/awareness camera on a hinge or some like solution.
Sent from my iPhone using PLT Nautique
Did anyone confirm that the new tower is taller when down? It is quite easy to put it down, where I bet there is no difference in height.
Comment
-
I have done the process of lowering the tower while driving the boat. I personally found it challenging while steering the boat to disconnect the Bimini knobs, then disengage the tower cams, then lower the assembly. I had to leave the helm too much to do the steps, and the channel is pretty narrow. Once the tower is down it’s also a bit challenging to just steer and adjust throttle because of where the tower lays. It absolutely is something I don’t want to do on every outing.
I have nothing against how the tower folds, the design is great, just not a viable option for my particular situation while under way.
Comment
-
-
1,000 Post Club Member
- Oct 2014
- 1026
- St. George, Utah
- Red Metal Flake 2016 G23! Malibu 25 LSV 2019 2021 Centurion Ri237
Originally posted by Peteg5 View PostI have done the process of lowering the tower while driving the boat. I personally found it challenging while steering the boat to disconnect the Bimini knobs, then disengage the tower cams, then lower the assembly. I had to leave the helm too much to do the steps, and the channel is pretty narrow. Once the tower is down it’s also a bit challenging to just steer and adjust throttle because of where the tower lays. It absolutely is something I don’t want to do on every outing.
I have nothing against how the tower folds, the design is great, just not a viable option for my particular situation while under way.
Are you all alone in the boat? Or are you like me and nobody else ever seems to take the time to figure out how the boat actually works?
Comment
-
I am usually solo in the boat when I’m there, it’s where I gas up and/or “gather” food and drinks for the crew and family. It’s a nice ritual.
Sent from my iPhone using PLT Nautique
Comment
-
-
Senior Member of PLANETNAUTIQUE
- Oct 2014
- 563
- Radford VA
- 2016 Nautique G23. Masters Blue/Gunmetal Flake
Originally posted by G_WaTT View Post-Cup holder lights are RGB. Also, behind the driver's seat the "Nautique badging" is lit (photo w/ purple LEDs). I assume the badging in the interior of the transom walkthrough will also be LED lit.
-Multiple BlueTooth Connection? Is this already an option(not yet a SAN owner)? Notice in the LINC Pano display you can see two separate gopro images. Can we hook up phone for audio (BT), NSS, and multiple gopros all linked up and functioning at once?
-New Gel Coat Colors - The left Image, Silver, is possibly the new "Medallion," and it's hard to tell, but it looks like there may be a slight redish tint to it? Maybe that's just what they're calling the new grey metal flake. I believe the center image, Orange, is probably the new "Solar Red."
-New Tower - I like the extra head room. I constantly bonk the noggin on speakers. Not a big fan of the fin above the color break, but the new rack looks great.
Comment
-
Originally posted by charlesml3 View Post
Did you get a chance to test the Pebble watch integration with the 2018 yet? I'm pretty sure it'll work just fine with the latest firmware and app, but I was hoping someone would get a chance to really do an in-person test.
Thanks!
-Charles
I did encounter some problems though. When I linked my watch to the boat I could not get the boat to respond to my watch. Ex: I would turn the volume up on my watch, but there was no increase in volume. I ended up having the boat "forget" the watch, then had my phone "forget" the watch, and finally re-synced the watch with the boat and everything seemed to be working great after that!
Lemme know if you have any specific questions and I'll try to help you out if I can.
Comment
-
-
Originally posted by G_WaTT View Post
I did link up my pebble to the boat and it worked great!
I did encounter some problems though. When I linked my watch to the boat I could not get the boat to respond to my watch. Ex: I would turn the volume up on my watch, but there was no increase in volume. I ended up having the boat "forget" the watch, then had my phone "forget" the watch, and finally re-synced the watch with the boat and everything seemed to be working great after that!
Lemme know if you have any specific questions and I'll try to help you out if I can.
Comment
-
-
Originally posted by charlesml3 View Post
OK, awesome. Are you running the latest and greatest firmware and app on the Pebble?
I got a used 1st gen pebble on ebay for $15
Comment
-
-
Originally posted by G_WaTT View Post
I assume the software is up to date since I just installed it last week. I'm not exactly sure what version it is, but I have an android phone and downloaded the pebble app from the google play store and proceeded to download the nautique app from within the pebble app. I believe I had read somewhere the apple store was also supporting the pebble watch, or at least were suppose to
I got a used 1st gen pebble on ebay for $15
-Charles
Comment
-
Comment