Strapless rack dimensions

[Argonaut]

I am making a custom bracket to adapt a Nautique strapless rack to my boat. Can someone do me a favor and measure the dimensions on their bracket as shown on the attached photo?

Thanks,

Marc

[GMLIII]

I don't have the same piece you need measurements for on my strapless racks. I don't mind getting you measurments but I don't have the piece shown above. Attached is a picture of my strapless rack

[Argonaut]

Thank you. It appears yours bolts directly to the tower

[GMLIII]

Thank you. It appears yours bolts directly to the tower

Yes and no. The rack bolts to a swivel then the swivel is attached directly/bolted to the tower

[jhouse865]

Argonaut Here are the dimensions you asked for. Just curious, which tower are you putting these on?

A - 8"
B - 3"
C - 2.25"

[Argonaut]

Thank you very much jhouse865! Can you also let me know the thickness of the bracket? It looks like about 3/8"

I have an illusion XS tower

[jhouse865]

Argonaut the thickness is just under 1/2". 7/16" to be exact.