Originally posted by RDT-G23
View Post
X
-
Last edited by RDT-G23; 04-07-2020, 03:16 PM.
-
-
1,000 Post Club Member
- Oct 2014
- 1026
- St. George, Utah
- Red Metal Flake 2016 G23! Malibu 25 LSV 2019 2021 Centurion Ri237
I suspect he means that most C-clamps are 1 1/8" in diameter and you can't make it fit the 1 1/4 shaft. It is nothing that a grinder can't solve, and that is what I did to my old puller to make it fit. But you can't do that at the lake once you bust up your prop. I would also verify the length of the hub, as it may not fit if the hub is too long. That would suck.
Comment
-
Originally posted by Tallredrider View PostI suspect he means that most C-clamps are 1 1/8" in diameter and you can't make it fit the 1 1/4 shaft. It is nothing that a grinder can't solve, and that is what I did to my old puller to make it fit. But you can't do that at the lake once you bust up your prop. I would also verify the length of the hub, as it may not fit if the hub is too long. That would suck.
Comment
-
-
Head to head Paragon drag race video finally finished. If the below link doesn’t work, check out N3 Boatworks YouTube page. They do a lot of interesting things like this from time to time. Great dealership to work with.
Sent from my iPhone using PLT Nautique
Comment
-
-
Originally posted by memerr View PostHead to head Paragon drag race video finally finished. If the below link doesn’t work, check out N3 Boatworks YouTube page. They do a lot of interesting things like this from time to time. Great dealership to work with.
https://youtu.be/tIej0Z5BPzc
Sent from my iPhone using PLT Nautique
Motor comparison was nice, but I'm more interested in how you got a dark air dam? hahahaah that's awesome
Comment
-
-
Like I said, N3 is fantastic to work with. The air dam is the only thing white on the boat and I couldn’t handle it. It’s a vinyl wrap done by the dealer.
Sent from my iPhone using PLT Nautique
Comment
-
-
Love the new design and fit and finish of the paragon but the new motor is really a over kill or need to fix something ,
on my paragon after 28 mph it starts to bob up and down in the front real bad to the point you have to slow down not sure why has any one else with a paragon experienced this
Sent from my iPhone using PLT Nautique
Comment
-
-
Originally posted by Eeleagle View PostLove the new design and fit and finish of the paragon but the new motor is really a over kill or need to fix something ,
on my paragon after 28 mph it starts to bob up and down in the front real bad to the point you have to slow down not sure why has any one else with a paragon experienced this
Sent from my iPhone using PLT Nautique
Sent from my iPhone using Tapatalk
Comment
-
-
1,000 Post Club Member
- Apr 2015
- 1295
- Martinez, GA/Lake Greenwood, SC
- 2017 GS20 Previous: 2011 SAN 210, 2007 Malibu Wakesetter 23LSV, 1995 Cobalt 200
Originally posted by Eeleagle View PostLove the new design and fit and finish of the paragon but the new motor is really a over kill or need to fix something ,
on my paragon after 28 mph it starts to bob up and down in the front real bad to the point you have to slow down not sure why has any one else with a paragon experienced this
Sent from my iPhone using PLT Nautique2007 Malibu Wakesetter 23 LSV, 1995 Cobalt 200
Comment
-
Originally posted by Eeleagle View PostLove the new design and fit and finish of the paragon but the new motor is really a over kill or need to fix something ,
on my paragon after 28 mph it starts to bob up and down in the front real bad to the point you have to slow down not sure why has any one else with a paragon experienced this
Sent from my iPhone using PLT Nautique
Sent from my iPhone using Tapatalk
Comment
-
-
Originally posted by nohlan_4 View Post
You have the ncrs plate in auto with no ballast when cruising like that?
Sent from my iPhone using Tapatalk
Sent from my iPhone using PLT Nautique
Comment
-
Comment