Wakemakers Piggyback for GS20

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cbeitel123
    • Mar 2017
    • 60

    • Los Altos, CA

    • 2017 GS20
    #1

    Wakemakers Piggyback for GS20

    Wakemakers seems to have a decent Cyber Monday discount. Was wondering if anyone has installed this 650lb dual piggyback kit and what we’re your impressions. I run 500lbs of lead in the rider locker so know the improvements in wake performance. Therefore mainly interested in how the system integrates in terms of fill/drain (heard this was not a strength of the kit) and how easy/difficult it was to install yourself. Thanks in advance on any comments.


    Sent from my iPhone using PLT Nautique
    Tags: None
  • cbeitel123
    • Mar 2017
    • 60

    • Los Altos, CA

    • 2017 GS20
    #2
    No takers?


    Sent from my iPhone using PLT Nautique

    Comment

    • Kinloch
      • Jan 2016
      • 46

      • New zealand

      • 2018 gs20
      #3
      Hi, I have installed this in my boat. System works well but I find it never drains both bags completely, when it drains to zero normally about 30% is left in the factory bag but the wakemakers bag is empty so you need to hit drain again. I did go to the setting and select the filter as suggested by the wakemakers instruction but found this gave an error message on the pump, our dealer said this will have been fixed by a software update which was done at last service so I need to try again. I have added a tap between the wake makers bag and the pump so if we have a full boat of people I don’t bother to fill the bags or I can fill factory bags and then only fill wake makers with the required amount of weight.

      Comment

      • JACOB11379
        • Jan 2020
        • 111

        • Copperopolis, California

        • 2020 Super Air Nautique GS20
        #4
        Originally posted by Kinloch View Post
        Hi, I have installed this in my boat. System works well but I find it never drains both bags completely, when it drains to zero normally about 30% is left in the factory bag but the wakemakers bag is empty so you need to hit drain again. I did go to the setting and select the filter as suggested by the wakemakers instruction but found this gave an error message on the pump, our dealer said this will have been fixed by a software update which was done at last service so I need to try again. I have added a tap between the wake makers bag and the pump so if we have a full boat of people I don’t bother to fill the bags or I can fill factory bags and then only fill wake makers with the required amount of weight.
        Did you add any weight to front of boat?

        How hard was it to plumb into existing boat hardware?

        with plane assist does the front of the boat still stay down?

        And how is the surf and wake?

        Comment

        Previous template Next
        Working...
        X