G23 Seadek Add-Ons

[BoatGuy2019]

Anyone ever got sea deck for the top of their tower? My kids and their friends jump off from up there often (I know, I know safety patrol) and would love to get some up there for some added grip.


Sent from my iPhone using the force of my 2019 G23

[RDT-G23]

I have not seen that before, but I like it.

Call SeaDek and see if they have the patterns.

Sea Dek is a wonderful product. That said, Jeff will give you a better review on getting something made than I will. (access) Though they have stock measurements for all of the factory pieces, they will tell you on the phone that they are proprietary to the manufacturer, that you need to measure each piece and provide them with what you'd like. Jeff, you and I have talked about this before. I'm sure I have something wrong on this. What say you?

[blueroom]

I think that has changed. Seadek sent me a a full boat diagram with all factory pieces. But this add-on kit sounds like it is good to go from the fabricator.

[buzzardmountain]

Hey guys, I just talk to my guy who did all the sea deck for me. He will do the kits for you complete, as you see mine, for 1000 shipped in either Mocha or Storm Grey, those are the OEM factory colors. It cost me 2k cause I had to pay for the scan time and install. He already has the patterns so no scan time, you would just have to install it or have someone install it but it looked pretty simple.

Could you send me their contact information?

[TNT-G23]

I would like their contact info as well. Thanks

[Bottlefedsi]

The owners name is Steven, I have already let him know you guys were interested. His number is 321-303-3964

[buzzardmountain]

The owners name is Steven, I have already let him know you guys were interested. His number is 321-303-3964

Sweet thanks!

[mcosub]

He is making some pieces for me this week for my GS22. I am not doing the complete interior vertical surface like the photos above but rather a few specific areas I want to protect.

[RDT-G23]

The first Paragon kit to be installed in the US... Thank you for the lead, Bottlefedsi.

[BasaltRMK]

All - looking for some SeaDeck pads for the gunwale behind the manual fold tower bases on my 2020 G21 (they took this out l, I’m guessing due to the relocated engine vents). Sent an email to NautiqueParts, is this the best approach? Located in western CO, FYI.


2020 SAN G21
2018 SAN G21 (traded in)
2015 Tigé R20 (sold)
1972 MFG Gypsy-15 (sold)

[Bottlefedsi]

All - looking for some SeaDeck pads for the gunwale behind the manual fold tower bases on my 2020 G21 (they took this out l, I’m guessing due to the relocated engine vents). Sent an email to NautiqueParts, is this the best approach? Located in western CO, FYI.


2020 SAN G21
2018 SAN G21 (traded in)
2015 Tigé R20 (sold)
1972 MFG Gypsy-15 (sold)

Call my guy Steven, his number is a few posts back, they will go to the dealer and scan a G21 in the slots you need then they will just send them to ya.

[BasaltRMK]

Awesome, will do. Thanks for the advice!


2020 SAN G21
2018 SAN G21 (traded in)
2015 Tigé R20 (sold)
1972 MFG Gypsy-15 (sold)

[RDT-G23]

I'm almost done with my Paragon. I have them going back to measure the circled spot because those locations now look weird without Sea Deck.

[trip33]

[QUOTE=RDT-G23;n653031]I'm almost done with my Paragon. I have them going back to measure the circled spot because those locations now look weird without Sea Deck.

That Looks awesome, I just reached out to get a kit for mine. Let me know how bad the install was or if you have any tips.

[RDT-G23]

It isn't much fun to install. They will send you a dry kit which amounts to patterned brown paper that simulated the Sea Deck pieces. They do this because the lights, heater duct, etc., are not perfectly in the same place on all boats. This is the time for you to ensure the pattern is correct before they make the Sea Deck pieces. Applying them involves placing them in the desired postion, taping half of the piece in place, then removing the other half (having scored the release sheet in the back about halfway) and applying. You then remove the tape that held the piece in place and repeat the application on the other side. I'd advise you to go on You Tube and watch a few videos on the process. Those videos will make all that I just typed - make sense. As I said above-isn't a lot of fun-but it sure makes the boat look more "finished" inside.