2002 SANTE Seadek template

[azeus17]

I'm looking to replace the sano pads on my 2002 210. I like the idea of putting on Seadek, but am having a hard time finding somewhere that has the template. I've been incontact with SC Wake, and could get the DIY kit to create a new template, but I thought I'd reach out here first to see if there is anywhere else I should check before I go through that process. I'm not looking to do the full interior, just the sano pads that run around the gunwales. Anyone have suggestions?

[core-rider]

brit_hunsicker who is your guy again? I believe he has a 2002 template already.

[brit_hunsicker]

Wow sorry guys, i hvent been on here in ages. Contact info is in picture.

[Stevemo14]

FYI,

I tried to contact Dek-Designs 2 times over the summer, and got 0 response by phone or e-mail. if you do get a response from them let me know.

[xlair]

I’d be interested as well if you can confirm someone has sea deck template for 2002. I was never able to get confirmation from anywhere.


Sent from my iPhone using Tapatalk

[Chris Parsons]

Just get a local seadek dealer to scan it. They are all over.

Sent from my SM-G986U using Tapatalk

[xlair]

My boat lives in far Northern WI. Not exactly a haven for Sea Deck dealers.


Sent from my iPhone using Tapatalk

[Chris Parsons]

Each boat has its subtle differences. I would encourage you to get the mylar template before you cut the seadek to make sure it fits.

Dek designs will be one of the easier to work with.

You could also go with another brand or another company and do the temolsting yourself. They send you the clear sheets, you draw what you want. They send you a cut template and then you confirm.

Good luck

Sent from my SM-G986U using Tapatalk

[core-rider]

SC Wake sent me templates for what was supposed to be 2003-up 210 gunnels, most of them were the wider 2002-earlier gunnels. You may want to check with them again as my templates should have corrected their issues.

Tell them what you have and they should have templates that are fairly close they can send you... then you’ll have to do some work fine tuning the fitment. IMHO this needs to be done for any boat as they are all slightly different. Kimberly was my contact and she was very helpful with all my questions and throughout the template process.

I went through 3 template fittings before getting my pieces. It’s time consuming and a bit costly shipping the templates back every time but well worth the time and money spent in the end.


Sent from my iPhone using Tapatalk