2021 G25 prop

[greggmck]

My prop is a 3433 and I managed to pull it with the 330S puller. I am unaware of any variations in the 330S but have included the requested photos for your viewing. I was able to get the puller on by lightly tapping on the rear end of the clamp. Its a pretty snug fit with the clamp wide open but works well. I was also informed that this model puller also worked replacing a prop on a 2020 G23 Paragon.

That's the same model I have. I wonder if the shaft is different on the Paragon. That could place the rear of the prop hub further from the end of the propeller shaft. This puller most certainly does not fit the 3563 prop on the Paragon without modification or extensive hammering. And one gentleman has already posted that he broke his puller hammering it on a G23 in the other prop thread.

Sent from my SM-G965U using Tapatalk

[revolve77]

That's the same model I have. I wonder if the shaft is different on the Paragon. That could place the rear of the prop hub further from the end of the propeller shaft. This puller most certainly does not fit the 3563 prop on the Paragon without modification or extensive hammering. And one gentleman has already posted that he broke his puller hammering it on a G23 in the other prop thread.

Sent from my SM-G965U using Tapatalk

I do know that this exact puller worked on a 2020 Paragon with a 3433 prop. Could there be a difference between the 2020 and 2021?

[greggmck]

I do know that this exact puller worked on a 2020 Paragon with a 3433 prop. Could there be a difference between the 2020 and 2021?

The only thing I can think of is in mid 2020 Nautique switched from the ZR7 / 2:1 engine / transmission combination in the Paragon to the ZZ8 / 1.5:1 configuration. That could have been where a different shaft/strut combo was added?

Sent from my SM-G965U using Tapatalk

[FOB1SAN]

I have the same prop puller. I replaced a 3433 with a 3433.

[greggmck]

I have the same prop puller. I replaced a 3433 with a 3433.

3433 is a 17" x 17" prop its not the prop used on the Paragon since mid 2020 when they introduced the ZZ8 engine.

Sent from my SM-G965U using Tapatalk

[greggmck]

So according to ACME there are at two versions of the 330S. The latest version has been redesigned with a wider opening to accept the new strut on the G23 and Paragon. This puller was first sold in March of 2020. This puller can be identified with the new wave ACME logo. Below are the images of the first generation and latest version of the puller logos. ACME is currently out of stock of the new versions.

First generation older than March 2020 will not fit 2021 G23/Paragon.


Latest generation produce after March 2020.

[FOB1SAN]

Cool. Looks like I need a new prop puller!

[revolve77]

3433 is a 17" x 17" prop its not the prop used on the Paragon since mid 2020 when they introduced the ZZ8 engine.

Sent from my SM-G965U using Tapatalk

Great info, I had no idea there was a variation in prop puller models. I do know that our local dealer as well as Nettle prop has the newer 330S' in stock.