FAQ - Nautique-Related Information

[skinautique]

Reprogramming Your Start Code

2000-2002
Type in your current code and DO NOT press start
Then hold down 1 and 3 at the same time for a couple of seconds. You will see the light start to blink. At that point, put in your new code, press start, type the same code in again and press start again. This should have you set.

2003-current
Do the same as the previous years but use 1 and 5 instead of 1 and 3.

Perfect Pass - Prior to the 6.5 chip:

To access water temperature, press the "menu" and "up" key at the same time. You can scroll through that menu by pressing the menu button.

Just a start - I will add more when I get time. If anyone else wants to chime in, feel free to do so......

[NautiqueJeff]

SN:

I have added a link on the main page that points to this post.

I was thinking of starting a similar section too, so I am glad to see this type of information come in. Let's keep it going!

[skinautique]

What else do people want to know how to do?

If anyone wants to learn how to use digital pro or wakeboard pro better, download the PP simulator at their site. I will add the link later, their site is down.
http://www.perfectpass.com/seriousskiers.html
Scroll down about halfway and you will find the links for these two simulators.

Using a trailer with a "V" bow stop.
Here is how to make sure you can put your cover on while the boat is snug in the "V".
Snug up the bolt for the bow stop prior to loading the boat. Load the boat, etc and then when you are ready to cover the boat, loosen the bolt and you will be able to rock the bow stop enough to slide the cover on. You don't need to do anything with the quick release pin. Just leave it in place.