Tweet
I just bought a 1995 SS,the Strut looks like its bent to the right.The prop looks like it sits just alittle to the right of the rudder.Is this normal?The boat runs fine,no vibration.
-
-
i feel really stupid,anyone know were i can get a strut from?Thanks -
Best bet is your local CC dealer, if not follow this link http://www.skidim.com/prodinfo.asp?number=SEF-S-19 and I would probably ask to make sure it works before you order, might only cover direct drive models. Mid Ohio CC has a special sale on a 16.5 degree strut for a 1 1/8" shaft as well but I would call about that as well to make sure it works. http://www.midohionautiques.com/CorrectCraft.htmHow 'bout a little reverse action...Comment
-
i cant seem to find any info on how to contact midohionautiques,i couldnt find a price on it.White lake seems to have one,i plan on calling mid,se correct craft dealers,white lake,and ski-dim tomorrow.Im hoping everything else is ok .The prop is not in the best shape,i bought it this way,but when i was looking at the boat i never noticed the strut was bent,i should be shot!!!!!!!!.
i was trying to post pic,but cant figure it out
ThanksComment
-
Yes, contact White Lake and make sure that you ask for the 10% Planet Nautique discount. It also looks like you have your work cut out for you on bringing that hull back to life! It's hard to tell because it is so dirty, but hopefully you don't have any blistering problems?? Good luck!2001 Air NautiqueComment
-
Yea the hull is very nasty,but the rest came clean.I havent started on it yet.
No blistering that i could see.white lake gives 10% off,ill have to mention that to them,thanksComment
Comment