PP Baselines TSC1 GT40

[Adrian]

I'm having problems with my magnets or my PP smart timer so playing with the system I changed the 34 mph baseline and I can't remember the old value. Until I fix the problem I just want to introduce a similar value and ski.
Could anyone tell me his 34 mph baseline?
I know different water, crew weight or wind affects baselines but I just want a reference until I fix the problem as I said.

Boat SN 1998 (TSC1), GT40 engine and factory prop.

Thanks

[NigelC]

RE: PP Baselines TSC1 GT40

Try adding about 200RPM to your 32mph value. Alternatively look at the baseline difference between 30 and 32 then add that difference to your 32 baseline for a rough 34mph value. That should get you quite close.
You could still use the PP manual hand timer if you have one in place of the magnet sensor.
Hope that helps.

[todda]

RE: PP Baselines TSC1 GT40

Adrian- my 34.2 mph setting is 3560 w/ a SSB of 11 on our '99 w/ GT40. This was calibrated in a surveyed course on a tournament lake, just above sea level (probably altitude 250') and water temp in the upper 50's. Hope this helps.

Todd

[Adrian]

Thank you very much for your answers, Nigel and Todd. Both very helpful.