SSN question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • TRDon
    Senior Member of PLANETNAUTIQUE
    • Oct 2007
    • 722

    • MN

    • 1985 2001 1993 Sport carb GT40 2003 SANTE Excalibur

    SSN question

    I have kinda been looking at V drives and noitced some have the pylons in the middle of the seating and some have the pylon in the front of the engine where the seating ends. Obviuosly the better placement but I never noticed when that change was made. Any help?
  • Bhenry27
    • Feb 2008
    • 24

    • Auburn, CA

    • 1995 Super Sport

    #2
    I have a 95 super sport, and I put a tower on it , and took out the center pole, and filled the hole. There still is a pull tie on the back of the boat for tubes, ect. now if you looking to ski off it, well you shouldnt buy a v-drive in the first place.

    Comment

    • Sinkoumn
      Senior Member of PLANETNAUTIQUE
      • Jun 2006
      • 578

      • MPLS - St. Paul, MN

      • Super Sport Nautique

      #3
      Here's what I did with my SSN ski pole (which IMO was the worst place to put the pole in the first place); put a tower on the boat and take out the ski pole:
      Before:


      After:



      To cover up the hole I just went to Lowes and got a shower drain cover for $1.99 and was set. The pole itself is very easy to remove if you choose to go that route.
      Neuston Boards
      Nautiques

      Comment

      • Andrew
        Senior Member of PLANETNAUTIQUE
        • Aug 2005
        • 891

        • Tuscaloosa, AL


        #4
        pretty cool!

        Comment

        • bkhallpass
          1,000 Post Club Member
          • Apr 2005
          • 1407

          • Discovery Bay, CA

          • 2001 Super Air Nautique (Current) 1998 Ski Nautique (former) 1982 Ski Nautique (Current)

          #5
          2000 was first year to mount the ski pylon behind the passenger seat. BKH
          2001 Super Air

          Comment

          • Laptom
            Senior Member of PLANETNAUTIQUE
            • Oct 2003
            • 876

            • Eindhoven, Netherlands


            #6
            bkhallpass is right.. But some 2000 models still have the pole in the middle... I think the change was somewhat in the middle of the production year.
            230 with ZR6 running on propane

            Comment

            • WakeSlayer
              1,000 Post Club Member
              • Sep 2005
              • 2069

              • Silver Creek, MN

              • 1968 Mustang

              #7
              Sinkoumn, do you still have the pylon? I have the extended one in mine, and would love to have the standard one. Short of that, I should just remove it like you did.
              the WakeSlayer
              1999 Super Air - Python Powered <-- For Sale
              1968 Correct Craft Mustang

              Comment

              • Sinkoumn
                Senior Member of PLANETNAUTIQUE
                • Jun 2006
                • 578

                • MPLS - St. Paul, MN

                • Super Sport Nautique

                #8
                WakeSlayer, yup I still have it. It's somewhere up north in the garage, I'll look for it when I go to open up the cabin Mid-April.
                Neuston Boards
                Nautiques

                Comment

                Working...
                X