Dial a surf wave SAN 210 2014+ tutorial

[ScooterMcgavin]

I’m pretty sure the even current 2019 210 is running the same hull running surface as the 14 and up. The gel-scheme has changed though

[NautiqueJeff]

Jeff this is me how could I be a Guest? Also I don't think I made this post. Is this a glitch in the system? Very odd. like I have been hijacked. Post #54

GMLIII This was not originally posted by you. It was posted by a member called clrprop, who asked me to delete his account back in October. When that happens, all of the posts a user made show that they were posted by "Guest".

[lucky7t]

I know this is an old thread but wonder if he’s in river mode ? This could throw off the speedo maybe


Sent from my iPad using Tapatalk

[skullx]

I think everyone checking this thread is curious to find out what's causing the lack of wave and rooster. It may be the prop after all. I've only ever ran the stock props on our 210's.

Haha, I've finally figured it out.
It was the paddlewheel!
It showed me 3 KPH (!!!) lower speed than actual. I was riding at 19-20 actual KPH (11.5-12 MPH), so wave was flat and got rooster. I took my phone with GPS speedometer app installed and rolled my eyes when I saw the numbers. Thought it's a river current and tried go back-forth, found out that wheel is lying.
Now I just ride at 14.3 KPH (8.6 MPH) by display, which is 17.3 KPH (10.5 MPH) actual speed.
Does anybody know how can I fix this wheel? Maybe these are water plants and I can clean them out?

[Soul_surfer]

Haha, I've finally figured it out.
It was the paddlewheel!
It showed me 3 KPH (!!!) lower speed than actual. I was riding at 19-20 actual KPH (11.5-12 MPH), so wave was flat and got rooster. I took my phone with GPS speedometer app installed and rolled my eyes when I saw the numbers. Thought it's a river current and tried go back-forth, found out that wheel is lying.
Now I just ride at 14.3 KPH (8.6 MPH) by display, which is 17.3 KPH (10.5 MPH) actual speed.
Does anybody know how can I fix this wheel? Maybe these are water plants and I can clean them out?

Yes absolutely, i had the same issue.
the little wheel is right under the driver seat wich is kind of a bad place when you have a boat lift.
first I lifted the boat all the way up for being capable of working under.
I see that the lift bar was right on it. Put the boat down, enlarging the boatlift bars that hold the boat larger so they wouldn’t interfere.
lift the boat another time and everything was ok for placement.
The two side « protection » of the wheel was all folded on the wheel. Replace them verticaly with pliers and everything worked fine.
If the wheel is broken it’s really easy to remove it and replace it too. 25$ at your local Nautique dealer.

[Izula369]

Hey Guys, I know this thread is a little old but I am looking to get a 2016 SAN 210 for next season and it has the FlyHigh bags installed already, so its will have two 400lbs bags extra in the back and then another 400lbs in the nose under the seats.
Will I need to do anything on the touch panel to have these fill, adjust fill times or anything?
Also my normal crew is myself, my wife and two kids, not alot of additional weight, will the load out above work or should I look at larger locker bags?
I want to keep the storage trays, if I need to upgrade the bags any recommendations?

[cedarcreek216]

Hey Guys, I know this thread is a little old but I am looking to get a 2016 SAN 210 for next season and it has the FlyHigh bags installed already, so its will have two 400lbs bags extra in the back and then another 400lbs in the nose under the seats.
Will I need to do anything on the touch panel to have these fill, adjust fill times or anything?
Also my normal crew is myself, my wife and two kids, not alot of additional weight, will the load out above work or should I look at larger locker bags?
I want to keep the storage trays, if I need to upgrade the bags any recommendations?

You may have to hit the fill button twice until the overflow spits out the sides, but that's it. If it has 400 pound sacs in it, that is standard plug and play and you will not lose your trays.

[AdamUCF]

Hey Guys, I know this thread is a little old but I am looking to get a 2016 SAN 210 for next season and it has the FlyHigh bags installed already, so its will have two 400lbs bags extra in the back and then another 400lbs in the nose under the seats.
Will I need to do anything on the touch panel to have these fill, adjust fill times or anything?
Also my normal crew is myself, my wife and two kids, not alot of additional weight, will the load out above work or should I look at larger locker bags?
I want to keep the storage trays, if I need to upgrade the bags any recommendations?

Seems odd to upgrade the stock pro ballast bags from 300lbs to 400lbs. I'm pretty sure the trays only come with the pro ballast option.