Proud new owner of a 2012 SANTE 210 and been having a blast out on the lake this summer but looking to improve my setup from any experienced 210 owners out there. I described my setup below and what I have noticed. Might help to note that I normally have 3-4 people in the boat and installed a surfpipe.
750lb bags piggyback on top of hard tanks in each rear locker
300lb bow sack under front seats
200lb lead weight (normally up in the bow)
NSS @1-2
Hydrogate @2-3 (ramp)
Speed 10.9-11.2
Generally will run rear bags on the surf side full with almost no weight in the opposite side. From what I have found people run almost equal weight in the rear lockers but for me it never seems to generate a surfable wave. Not sure if someone has the same setup in a 2012. I have read some of the threads on 2014+ 210's but not sure if the hull design and specifications changed drastically enough to make my setup work the same. Any help or suggestions are greatly appreciated.
I will try to get out tomorrow to do some testing before the weekend and can upload some pictures.
THX!
750lb bags piggyback on top of hard tanks in each rear locker
300lb bow sack under front seats
200lb lead weight (normally up in the bow)
NSS @1-2
Hydrogate @2-3 (ramp)
Speed 10.9-11.2
Generally will run rear bags on the surf side full with almost no weight in the opposite side. From what I have found people run almost equal weight in the rear lockers but for me it never seems to generate a surfable wave. Not sure if someone has the same setup in a 2012. I have read some of the threads on 2014+ 210's but not sure if the hull design and specifications changed drastically enough to make my setup work the same. Any help or suggestions are greatly appreciated.
I will try to get out tomorrow to do some testing before the weekend and can upload some pictures.
THX!
Comment