99 Python Super Air Rebuild.

[Treybizttu]

I kept it pretty much stock. Budget and timing kept me from exploring more power, I've got a buddy in houston into the big motor small package scene that has a great motor builder/tuner but I took what I thought was the simpler route.

[Treybizttu]

On the water

[Treybizttu]

Just now got past the "break in hours" for full throttle and normal operation. This summer has been way too busy with non-fun work related nonsense.

[Cadesun]

I had a '98 Super Sport GT40 with the same color package! Super sharp boat, great work.

[Treybizttu]

Spring 2020 Stuff:

Roswell Tower Delivered Yesterday. Should have it on in the next Month.
Bimini when funds replenish from tower and install.

I've got two new amps and in boat speakers ready to install.

Re-doing all of the daisy chain grounds.

Should be it for this spring....

[MDRichmond]

When you replace the current tower/bimini, what are your plans for the old bimini? I'm wondering if it's serviceable and if it would fit onto my JoyStick tower. Does it attach with clamps to the tower or is the attachment built into the existing tower?

[Treybizttu]

Need to update this i guess and certainly need some new pictures.

60 or so hours on the 502. Been a rough couple summers to get lake time in.
Roswell Tower is On
I'm replacing amps and interior speakers this week
Cover is getting touched up for the new tower this week as well.
Still need to work on grounds.. Perfect Pass seems to do it's own thing and ballast pumps cause a momentary shut off of everything.

After the season is over I'm going to hopefully find a good local glass guy to fill the old tower holes and a few other little spots. I've done Gel before myself and wasn't really thrilled with the result.

[BMANNING]

Trey,
There is a guy down the road from me that does gel coat (about 15 mins from Grapevine). He is at the corner of McMakin Rd & Hawk Rd in Double Oak. I always see a lot of boats around his shop however I have no experience with the gentleman. Just thought he might be somebody to contact.