Help, PP settings needed.

[MNSuperAir]

Hey,

I have a 2001 SAN with the ACME 856. When I run stock ballast it seems to perform ok but when I load the boat with an addtional 1000# it surges all over the place. Is anyone having any luck with the PP settings for this setup? It is really driving me nuts.

Thanks

[brodie]

Raise your KDW setting to 130-150. I think the factory setting is 80, and they recommend raising it for heavily loaded boats. You could also adjust how often it reads the paddle wheel before it adjusts, but i would check KDW first.