Packing size for 2000 SN

[Rick]

Anybody off the top of their heads know what size the prop shaft packing is for a 2000 SN? Thanks

[Rick]

Ok to answer my own question for fututre reference 1/4" for the prop shaft 3/16 for the Rudder.

[Rick]

Just finished the rudder. I was WRONG! The rudder uses 1/4" X 2 pieces. The prop shaft uses 5 X 3/16. To get to the rudder you need to remove the back seat, the drivers side bolster, the rear storage deck, and the gas tank. Make sure you support the rudder from underneath or it will fall out after you undo the packing nut. Also make sure you rewire the bolts holding ther rudder in and the tiller on. Total time was about 2.5 hours.