what prop size should I go with

[hdultra]

I have 2004 210 team with the zr6 engine. I run factory ballast with around 5 to 7 adults most of the time I go out. My old prop has a bent blade and am going to get it repaired but was looking for some ideas on a new prop with some more low end. I know I should say what pitch my current prop is but I don't know at this time boat is at the lake house.
Thanks

[Rick]

RE: what prop size should I go with

Call ACME. they will be able to send you a prop for your Specs. If it doesn't work llike you want they will usually exchange it until you get what you want in performance.

[Mikeski]

RE: what prop size should I go with

Acme 1272

[bchesley]

RE: what prop size should I go with

Mikeski,

1272? is that a new one. I have not heard of it. What are the specs?

[Mikeski]

RE: what prop size should I go with

The 1272 is the same spec as the 1234 but the cup is deeper to help from overrevving that 6.0L.

1272 = 0.150 cup depth

1234 = 0.105 cup depth

I have ran both on my slightly modded Excalibur. It couldn't turn the 1272 as hard as I liked so I stepped back down to the 1234.

[hdultra]

RE: what prop size should I go with

Thanks for the replys I saw another thread saying that delta has them on sale so this works out great thanks again