2 prong near engine

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • gride300
    1,000 Post Club Member
    • Apr 2008
    • 1356

    • mobile, al


    2 prong near engine

    i was removing the old power/ground wires today and found a little 2 prong harness not connected to anything right in the engine compartment. it has two grey wires coming out of it that seem to run around the port side up to the bow somewhere. any ideas?
  • SquamInboards
    Senior Member of PLANETNAUTIQUE
    • Sep 2005
    • 397

    • Squam Lake, NH

    • '82 2001 '84 2001 '86 2001 '98 NSS '87 American Skier

    #2
    RE: 2 prong near engine

    what boat and engine?
    How 'bout a little reverse action...

    Comment

    • gride300
      1,000 Post Club Member
      • Apr 2008
      • 1356

      • mobile, al


      #3
      RE: 2 prong near engine

      it's a 2005 210 with ex330. the boat has had 0 problems since it was purchased new so i was just curious.

      Comment

      • GoBig
        Senior Member of PLANETNAUTIQUE
        • Apr 2008
        • 551

        • Santa Cruz, CA


        #4
        RE: 2 prong near engine

        gride - That is common. I have the same on my EX330. I showed it to the tech at my dealer and he said that connector is not used on our block. I'm not sure what it is for though...
        2003 SANTE

        Comment

        • gride300
          1,000 Post Club Member
          • Apr 2008
          • 1356

          • mobile, al


          #5
          RE: 2 prong near engine

          ok thanks.

          Comment

          • TravisFling
            Senior Member of PLANETNAUTIQUE
            • Mar 2008
            • 889

            • London, Ohio

            • 1989 Ski Nautique 2001

            #6
            RE: 2 prong near engine

            shower, right?
            Travis Fling
            Choctaw Lake
            Current - 1989 Ski Nautique 2001

            Comment

            Working...
            X