Upgrading ballast pumps on a 2003 SAN 210

[PHXSANTE]

I am in the planning phase of upgrading my ballast system...I currently have (4) bags about 3K lbs in the boat (2) in the rear lockers (1) in the belly (1) under the seats in the bow. They are all using dedicated aerator pumps for emptying and sharing (2) 1100 gph aerator pumps to fill with sprinkler valves controling the flow. I have purchased (4) reversible Jabsco Ballest Puppies and would like to dedicate one per bag and get rid of the sprinkler valves. My question is can I use the current push button swithes on the key pad or do I need to install new ones. I have read something about a DSS system in the 03's and that they may not have enough amps for the Jabsco pumps. Also if any one has a wiring diagram it would be great. Can anyone help?

Thanks,

Andy

[bchesley]

RE: Upgrading ballast pumps on a 2003 SAN 210

You could use the button on the dash and a relay. That would keep the current from running through the switch. The pumps will draw as much as 20amps. Did the 03 have three switches on the dash?