Yellowing on White Vinyl?

**1999Sport** · 06-17-2009, 08:56 PM

Ok....so here is a picture of the vinyl in the boat. I just put a coat of 57 on it and I'm leaving the cover off to see how it looks tomorrow. As you can see in the picture (hopefully) the upper part of the seat is a dingy yellow and the lower is white.

Also, I know some people use 303 and other use 57, is 303 better?

Attached Files

**rocco** · 06-17-2009, 09:23 PM

Yellowing on White Vinyl?

My guess both are about the same,,never have used 303,always used #57 for about 15 yrs,,No problems to date...I do just a little soap and water then a good wiping of # 57 all over.....Looks like New..........

**mndanielsncsu** · 06-17-2009, 09:36 PM

RE: Yellowing on White Vinyl?

I use both 57 and 303. I clean with 57, then condition/protect with 303.

**Chexi** · 06-17-2009, 10:48 PM

RE: Yellowing on White Vinyl?

303 is not a cleaner, it is a protective barrier.

**AirTool** · 06-17-2009, 11:15 PM

RE: Yellowing on White Vinyl?

How does the 57 compare to the 3M version?

**GoBig** · 06-18-2009, 01:28 AM

RE: Yellowing on White Vinyl?

A buddy of mine who owns a detail shop hooked me up with a case of MOC Foaming Fabric & Vinyl Marine cleaner. It is incredible. I followed with MOC Vinyl Protectant and my interior is gleaming. Unfortunately, I think this is only available wholesale. I haven't been able to find a retail outlet that carries this stuff.

**mndanielsncsu** · 06-18-2009, 07:51 AM

RE: Yellowing on White Vinyl?

I've always felt that 57 does a better job of cleaning than 3M. I'm psycho about my cleaning regiment whenever I take the boat out and I've always gone back and forth between 57 and 3M. I just seem to have better results with 57. I'm sure the argument will go both ways though.