Tweet
:| 2006 - 226 Team Air - Bilge pumps are not operational on either auto bilge or switched position. Have checked both circuit breakers - appear OK.
What else should I be checking?
Paul G.
What else should I be checking?
Paul G.
-
-
I do not have the answer yet, but I have the same problem. The only time the bilge seems to be working is when the bilge only switch is on. I have a call into the dealer to see what could be the problem. -
I had the same problem with one of the two. My problem is that one of the pins in the plug on the harness side had slipped (slightly) out of the molded housing. I pushed it back in an problem solved. Unplug your pump and check the voltage there with a meter.Comment
-
had the same problem on my 2000 SNOB and it was a simple fix - one of the pins on the plug harness in the bilge came loose .....Comment
-
Turned out to be that both bilge pumps were bad. Just replaced both, back in business!
Paul G.Comment
-
Take one or both of your old pumps and connect the wires directly to a battery and report back.
AirToolComment
-
Airtool,Originally posted by AirTool
Yes I did that and both failed on direct feed from battery.
Can of odd that both failed at the same time, but it was an easy fix.
Paul G.Comment
Comment