Tweet
After I installed PP this spring my throttle has been out of adjustment, regarding transmission engagement. I have to move the lever quite a long way until it goes into gear, forward and reverse. Its almost to the point where the RPM's increase about the same time it goes into gear. I also tried to put the ball joint on the lower hole of the engagement lever on the transmission, this worked well except it stiffened up the throttle lever a lot. Are there any other adjustments I can make? Is there an adjustment on the throttle lever that fine tunes the transmission engagement? Any help is appreciated.
-
\'95 SN Signature Ed.
GT-40
PP Stargaze
**For Sale** -
You can adjust this right where the servo cable hooks up to the throttle cable. Sometimes, they aren't set up right when you initailly do it. Just move the nut a couple of threads and see where that gets you. -
Will that make a difference with the transmission engagement? The main problem is that I have to move the throttle lever too far, (forward and reverse), before it goes into gear.\'95 SN Signature Ed.
GT-40
PP Stargaze
**For Sale**Comment
-
You may need to check the transmission linkage. Check out this thread:
http://www.planetnautique.com/index....ission+link%2AJeff
---------------------------
2002 Air Nautique (DD)
GT-40
----------------------------Comment
Comment