GT40 with aftermarket dipstick!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • dwsa
    • Sep 2005
    • 134



    GT40 with aftermarket dipstick!

    Gents,
    My GT40 has an aftermarket chrome dipstick because the original one got broken and replaced. I would like to be sure that the high and low oil indicator marks are correct. Could anyone with a GT40 post the measurement from inside the cup below the dipstick handle to each marking on the dipstick. Much appreciated. Regards, Greg
  • Rick
    1,000 Post Club Member
    • Mar 2004
    • 1250

    • San Diego, Ca

    • 1962 Keaton Utility. 2000 Ski 1965 Barracuda

    #2
    RE: GT40 with aftermarket dipstick!

    my 2000 SN with a GT 40 is 25" to the full mark and 25 5/8" to the add line The seal on the dipstick is 1/2 " and has been added to the measurement.
    Nautiqueless in San Diego

    Comment

    • dwsa
      • Sep 2005
      • 134



      #3
      RE: GT40 with aftermarket dipstick!

      Thanks Rick, I will check mine. Does your 1/2" seal on dipstick go inside the dipstick tube? or outside like a cup over the end of the tube?? Thanks again. Greg

      Comment

      • Rick
        1,000 Post Club Member
        • Mar 2004
        • 1250

        • San Diego, Ca

        • 1962 Keaton Utility. 2000 Ski 1965 Barracuda

        #4
        RE: GT40 with aftermarket dipstick!

        Its outside like a cup.
        Nautiqueless in San Diego

        Comment

        Working...
        X