Q: flight clip bungee replacement?

[AirTool]

Anybody know where the best place to buy the replacement bungiees?

If someone knows where the best is and we have to buy a full roll. I might volunteer to do it and distribute for a fair $/ft split plus shipping.

[obd666]

anyone come up with something on the bungee ? ... i just started taking apart my clips

[obd666]

i just ordered new bungee for my flight clips, and ended up having to get 60 ft of it ... will have enough for two extra sets (8 sections). bungee is 1/4 inch black nylon, pre-cut into the necessary 2 ft segments, with the ends fused. once i get them i will update on the quality, but the pics looked good. if anyone is interested, will send out a set for $10 plus shipping ...

[geoffc210]

i just ordered new bungee for my flight clips, and ended up having to get 60 ft of it ... will have enough for two extra sets (8 sections). bungee is 1/4 inch black nylon, pre-cut into the necessary 2 ft segments, with the ends fused. once i get them i will update on the quality, but the pics looked good. if anyone is interested, will send out a set for $10 plus shipping ...

Interested in purchasing - Sent you a PM

[TRDon]

I will probably be sending you a message sometime soon as well.

[AirTool]

i just ordered new bungee for my flight clips, and ended up having to get 60 ft of it ... will have enough for two extra sets (8 sections). bungee is 1/4 inch black nylon, pre-cut into the necessary 2 ft segments, with the ends fused. once i get them i will update on the quality, but the pics looked good. if anyone is interested, will send out a set for $10 plus shipping ...

I'll take a set...pm me.

[obd666]

the two spare sets have been spoken for ...

[AirTool]

http://nautiqueparts.com/bungieflightclipreplacement.aspx

I ended up just ordering two of these kits from David at White Lake.

http://nautiqueparts.com/bungiefligh...placement.aspx

Probably a little more pricey than just bungee but I got new hose, balls, clips, etc.

Be sure to use your discount code.

[AirTool]

For those of you who have replaced your bungee....did you do anything special when you cut your bungee cord like use a hot knife or tape and seal up with a flame? ....or did you just cut it with a razor and do nothing extra to the end?

[Mikeski]

I used a flame to keep the braid from fraying, it helps during re-assembly.