Trailer Bearings Early 90s

[steelerguy]

Does anyone have the numbers for the Drum seal for an early 90s Correct craft Trailer?

The inner bearing is 67048
Outer is 25580

I have 413470 as the Drum seal, but not really seeing it as part of any kits.

West marine and others has the kits for about $15 bucks But the seal is not big enough. I then I have to order the drum seal from a parts store for $8 each.

Sure would be nice to just order a kit with the right seals for $15.00. Any help?

[steve-o]

The spindles are usually sized based on weight rating. What is the bolt pattern and diameter on your wheels?

[steelerguy]

I have the Six lug bolt pattern and upon further research with our Sister site I found this thread:
http://www.correctcraftfan.com/forum...ailer-bearings

So with that I went to www.etrailer.com and found everything I needed.

They too sell kits but not with the right seal so I have to part it out.

Gonna be $28.34 with shipping to my door.

Hopefully these bearings are not crap.

WHat would be really nice is someone new how to cross these with Napa.

[steve-o]

You could always just measure the spindle. A six lug wheel is going to be larger than 1", and probably larger than 1 1/16". Those might be 1 1/4" tapered spindles.