Can't find Shower wires for 02' Super Air

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • awake4air
    • Jul 2003
    • 129

    • CA


    Can't find Shower wires for 02' Super Air

    Does anyone know where the 2 wire plug is for the shower on a 02' Super Air? I know the pod is already pre-wired, but I can't find the end of the plug. Is the end of the plug behind the pod, or is it wired back to the engine compartment? According to the wiring diagram, its supposed to be an orange/black and black wires but I can't find them anywere in the engine compartment where I was expecting to find it.

    I just ordered a shower from wakeside and am trying to get this thing hooked up. I installed a heater myself with relatively no problems.
  • AirJeff
    • Jul 2004
    • 168

    • White Bear Lake, MN


    #2
    Are you looking behind the kick pannel? That's where our connector is for the shower...we still need the shower though. The connector is right up next to the one for the heater in our boat. It is a big wad of wires.
    Jeff
    ---------------------------
    2002 Air Nautique (DD)
    GT-40
    ----------------------------

    Comment

    • awake4air
      • Jul 2003
      • 129

      • CA


      #3
      I didn't look behind the kick panel yet. I assumed it would already be wired back to the engine compartment. I guess I have to wire it up myself.

      Any ideas on where to put the shower instument panel? Is there a specific factory location?

      Thanks,
      Paul

      Comment

      • AirJeff
        • Jul 2004
        • 168

        • White Bear Lake, MN


        #4
        You probably won't have to do more than pull the factory wire. Our boat has a large zip tied coil of wire for the shower under there. You just have to run it to where you put the pump.
        Jeff
        ---------------------------
        2002 Air Nautique (DD)
        GT-40
        ----------------------------

        Comment

        • awake4air
          • Jul 2003
          • 129

          • CA


          #5
          I pulled the factory wire. Correct Craft made it very easy on me to run the wire since they left so much wire on there in the spool. Thanks CC.

          Comment

          Working...
          X