Tweet
ON the dash pod, there are buttons to fill and drain the launch system, but the wires do not make it to the back. Under the dash, there are two bundles of wound up wires that when i check thier power, do not really come on with anything that i can tell. What is the procedure to get the power back to the ballast sytem if i was going to try to aftermarket somethin on my own.
also, the keyless start seems to never reset and is always on or keyed. I've tried waiting for two days or more, i've tried entering the code to turn it off, etc, just wont become inop. could it be broke, or could the right primary or factory codes be used in some way to reset this. would a call to CC in orlando, John be helpful (when they get back from vacation).
Thanks in advance
also, the keyless start seems to never reset and is always on or keyed. I've tried waiting for two days or more, i've tried entering the code to turn it off, etc, just wont become inop. could it be broke, or could the right primary or factory codes be used in some way to reset this. would a call to CC in orlando, John be helpful (when they get back from vacation).
Thanks in advance
Comment