I've got a 2007 216TE with PCM engine. Went skiing this AM & boat started up just fine. Went to start it for evening ski & wouldn't start. Area dealers are closed for the rest of the weekend now.
When I hit the start button, the engine tries to start, but I get no spark.
Battery was replaced two weeks ago + it sounds strong/charged.
I've checked the kill lanyard & it is plugged in.
I'm thinking the problem may be related to some type of computer issue.
The Fuel, Battery, Oil Pressure, etc. gauges (analog + digital versions of both) don't read anything after tapping start for a 2nd time (eg: how you can get gauges on when fueling).
Blower & Bilge pumps run good & radio also runs. Ballast tanks fill & empty & their gauges work.
I also tried hitting all the breaker buttons in front of driver seat & nothing works.
Any ideas of things to try?
When I hit the start button, the engine tries to start, but I get no spark.
Battery was replaced two weeks ago + it sounds strong/charged.
I've checked the kill lanyard & it is plugged in.
I'm thinking the problem may be related to some type of computer issue.
The Fuel, Battery, Oil Pressure, etc. gauges (analog + digital versions of both) don't read anything after tapping start for a 2nd time (eg: how you can get gauges on when fueling).
Blower & Bilge pumps run good & radio also runs. Ballast tanks fill & empty & their gauges work.
I also tried hitting all the breaker buttons in front of driver seat & nothing works.
Any ideas of things to try?
Comment