GT-40 MAP sensor number

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Chexi
    1,000 Post Club Member
    • Feb 2025
    • 2119

    • Austin

    • 2000 SAN

    GT-40 MAP sensor number

    Anyone have the part number for the MAP sensor for a GT-40? Mine is a 2000 in case that matters. I'm asking so I can pick up the part before going down to my boat this weekend. Thanks.
    Now
    2000 SAN

    Previously
    1999 Air Nautique
    1996 Tige Pre-2000
    1989 Lowe 24' Pontoon / Johnson 100HP outboard
  • peteSki
    • Mar 2005
    • 230

    • Ottawa, On, Canada

    • 2005 Sport Nautique 216 Previous: 1997 Ski Nautique

    #2
    I've got a 97 Ski with GT-40, the number on my MAP sensor is E70F-9F479-A2A. Probably the same one on yours.

    Pete

    Comment

    • Chexi
      1,000 Post Club Member
      • Feb 2025
      • 2119

      • Austin

      • 2000 SAN

      #3
      Thank you. Do you know where on the engine these are located?
      Now
      2000 SAN

      Previously
      1999 Air Nautique
      1996 Tige Pre-2000
      1989 Lowe 24' Pontoon / Johnson 100HP outboard

      Comment

      • 74green
        • Nov 2009
        • 281

        • Canyon Lake, Texas

        • 2001 Air Nautique

        #4
        Should be a "D" after the 7 not "0"...E7DF-9F479-A2A
        Attached Files
        Current: 2001 Air Nautique GT-40

        Comment

        • Chexi
          1,000 Post Club Member
          • Feb 2025
          • 2119

          • Austin

          • 2000 SAN

          #5
          Thank you gentlemen.
          Now
          2000 SAN

          Previously
          1999 Air Nautique
          1996 Tige Pre-2000
          1989 Lowe 24' Pontoon / Johnson 100HP outboard

          Comment

          • peteSki
            • Mar 2005
            • 230

            • Ottawa, On, Canada

            • 2005 Sport Nautique 216 Previous: 1997 Ski Nautique

            #6
            Ooops. Apologies for the typo on the part number. I used an old pic I took of it some years ago where the typo was originally made. Have attached the pic, shows the location from a bit further out. Ignore the black text added to the pic. Pretty much you remove the plastic cover on the top of the engine to expose the MAP sensor.

            Pete
            Attached Files

            Comment

            Working...
            X