Rear hatch - hydraulic hatch - relays - HELP

[purgatory1971]

I have a 2000 SAN that I replaced the relays for the rear hydraulic hatch. They are both 5 pin relays and I think I hooked them up wrong. The orange wires from the keypad and the hydraulic works. I am having a problem hooking up both realys together.

I have a total of 2 power leads - that go to each relay - 30
I have two grounds that goto 85 on both relays
I have two orange wire from the keypad - one goes to each relay
I have one black from the hydraulic
I have one red from the hydraulic
I think each orange wire from the keypad go to 86 on each relay

I need help hooking up both relays -
30 -
85 -
86 -
87 -
87 A

please help.
Thanks
Steve

[PinkPython]

This is exactly my question on the relays. Did you figure it out?? I have a picture of the way one of them should be, but not the other.

[Kevin Sullivan]

Whttps://www.planetnautique.com/vb5/f...etch?id=362305