Hi everyone. Been out on my boat this weekned and boat has been great. But today we had alot of rain and when i came to get the boat of the water she started up fine from the start button on the keypad. (It was still powered up as i had not shut it all down). Put the boat on the trailer and nothing happened when i pressed the stop button. Tried all sorts and in the end i pulled the kill switch. Then tried to get it going again and seem to have lost all power to the keypad. Would all the rain have caused this? Is there anything else i can check for?
Also looking at putting in a bypass keyswitch. I have done a search on here and have found several threads but nothing really solid to tell me how to go about it.
I have got the wiring diagrams from here but cant work out which would be my ignition on to put power to my clocks etc and which would be the starter?
If anyone can help i would greatly appreciate it.
Many thanks
James
Also looking at putting in a bypass keyswitch. I have done a search on here and have found several threads but nothing really solid to tell me how to go about it.
I have got the wiring diagrams from here but cant work out which would be my ignition on to put power to my clocks etc and which would be the starter?
If anyone can help i would greatly appreciate it.
Many thanks
James
Comment