Winterization Ski Nautique 2001 from 1989 (PCM 40A)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • djpittbull
    • Nov 2011
    • 4

    • Belgium

    • Correct Craft 1989 Ski Nautique 2001

    Winterization Ski Nautique 2001 from 1989 (PCM 40A)

    Hello,

    This year I buyed a Ski Nautique 2001 from 1989.

    I want to do the winterization by myself but I'm quite a newbee in this.

    I founded some informations on the website correct craft fan.com (http://www.correctcraftfan.com/forum...=winterization)

    But I wanted to know if somebody has the winterizing manual for this PCM 40A Engine.

    Or some pictures to shox me where I have to remove all the water from the engine.

    Excuse me for my English, It isn't good but I hope you can help me.

    Best Regards

    Steve from Belgium.
  • TRBenj
    1,000 Post Club Member
    • May 2005
    • 1681

    • NWCT


    #2
    The thread you linked to has all the pictures you need. There is no difference in your powertrain than what is shown.

    FYI, "40A" is the transmission model. The engine is surely a Ford 351w, marinized by PCM.
    1990 Ski Nautique
    NWCT

    Comment

    • djpittbull
      • Nov 2011
      • 4

      • Belgium

      • Correct Craft 1989 Ski Nautique 2001

      #3
      Ok thanks for your advice!

      Best Regards.

      Do you know where I could find the owner's manual for à 1989 Ski Nautique 2001?
      Last edited by djpittbull; 11-08-2011, 10:06 AM.

      Comment

      • east tx skier
        1,000 Post Club Member
        • Apr 2005
        • 1561

        • Tyler, TX


        #4
        Here's the PCM engine manual for 1989.

        http://www.planetnautique.com/Correc...nersManual.pdf

        I didn't see the owner's manual linked on this site, so try this one. It's for an 87, but that's pretty close.

        http://correctcraftfan.com/Downloads...s%20Manual.pdf
        1998 Ski Nautique (Red/Silver Cloud), GT-40, Perfect Pass Stargazer 8.0z (Zbox), Acme #422, Tunable Rudder.

        Comment

        Working...
        X