Tweet
Yes, it is real cramped...until you decide to pull out the tanks and install sacs for the ballast system (but that's a whole 'nother project).
As the boat is set up now, you can pull out the divider (between the engine and storage compartment) most easily by pulling up and out the rear seat back. There may also be a thin divider there between the engine compartment and the passenger area. With this stuff out, you can lift up that large sundeck out of the way, get in the port storage area and stretch you legs out into the seating area of the boat, sort of lay down in the storage area. Then you can get to the impeller more easily.
Please read up on all the impeller threads before you start
As the boat is set up now, you can pull out the divider (between the engine and storage compartment) most easily by pulling up and out the rear seat back. There may also be a thin divider there between the engine compartment and the passenger area. With this stuff out, you can lift up that large sundeck out of the way, get in the port storage area and stretch you legs out into the seating area of the boat, sort of lay down in the storage area. Then you can get to the impeller more easily.
Please read up on all the impeller threads before you start
Comment