Tweet
just received my new-to-me '99 ski and my first project is to replace the heater, which the core was removed and hoses bypassed. does anyone know what auto core is the replacement for my 2 port heater ?*also the fan didnt turn on with the heater switch,tho light on switch did come on, where do i start to figure this out, voltage @ fan motor ?
-
-
Check heatercraft.com2010 Super Air Nautique 210 Team Edition -
If you go to heatercraft, replace it with the 3 port heater. It is MUCH stronger.
I know you can replace it with an auto core but don't remember which one. If you do a search, you will probably find it.Promo Team member
1999 196
2003 196 Limited 2003 196 Limited
2008 196 Limited 2008 196 Limited
2010 200 Team 2010 200 Team
2011 200 Team 2011 200 Team
2012 200 Team - 2012 200 Team
2013 200 Team - 2013 200 Team
2014 200 Team - 2014 200 Team
2015 200 Team - on the wayComment
-
Dave, where were the heaters installed on your 196's? Dad bought a 3-port unit to put in his '09 and the shorter air box makes things REALLY tight. I dont think it will fit on the horizontal surface.1990 Ski Nautique
NWCTComment
-
Are you saying two port because the core itself has two openings? Or you just have a two 'vent' heater. I believe it is the same as like a 90's ford pick-up, but i'm not 100% on that...Comment
-
I had a 4 vent in my 99 ski, it was tight, but not impossible.2005 Ski Nautique 206 SE, Acme 422, PP SG 8.0, ND Tower
2011 strada with strada bindings
Prior Boats:
1986 Sunbird skier with 150 Evinrude VRO
1992 Mastercraft prostar 190, with Powerslot
1999 Ski Nautique GT-40
1999 Sport Nautique, GT-40 FCT,
www.skiersofknoxville.orgComment
Comment