perfect pass jumper wire for faria gauge

[vanislwake]

I'm putting the white face faria analog gauges in my 02 sante, my boat has perfect pass with a paddle wheel, i forgot to order the jumper cable kit but figured what more could it be than tapping in to the right wire from the paddlewheel?? Can anyone enlighten me here? perhaps be able to tell me which wire from the paddlewheel/perfect pass it is i need to tap in to for the signal wire from gauge?? Thanks

[Rick]

I wrote a thread earlier with copies of the directions. Here is the link. http://www.planetnautique.com/vb3/sh...highlight=Rick The jumper as I remember it is actually splitting between the gauges. I bet if you called or emailed PP they could provide one.

[hyparks]

Hi. I posted a thread recently about this as I was doing some re wiring on my boat and forgot which wires on the jumper cable went where.
The wires you need to tap into are the green and white wires from the paddle wheel.
Spoke to Aaron from perfect pass and he told me the green is the signal wire and the white is the ground.
Ricks link includes 2 downloads which gives you all instructions including which wires for jumper cable and potentiometer etc.
Hope this helps.

Sent from my HTC Desire HD A9191 using Tapatalk