drain plugs

[boltonn]

I let a dealer do my winterization cause i didn't know what i was doing but all he did was drain the water and to save the money i figured id get it ready for summer. i have three plugs i know two are for the manifolds but the other i don't have a blue its much smaller than the other two any ideas to what its for?

[TxJole]

What motor? I would be willing to bet its from the water collector housing, but it could be from the water intake. Also make sure the knock sensors are tight, some just start them so they dont rust block threads.

I let a dealer do my winterization cause i didn't know what i was doing but all he did was drain the water and to save the money i figured id get it ready for summer. i have three plugs i know two are for the manifolds but the other i don't have a blue its much smaller than the other two any ideas to what its for?

[boltonn]

GT 40 dd

[boltonn]

Are the knock sensors on both sides of the block ?

[TxJole]

I'm out on the GT 40's forget everything I said on my other post and start fresh.

[jasper]

It is probably the transmission cooler drain plug. See the thread in the link for more and a picture.

http://www.planetnautique.com/vb3/sh...ion-Drain-Plug

[boltonn]

Thanks for the help!