I finally decided to finish my last winter project. What I want to do is install a center ballast system in my 04 SAN LE. I should have purchased one with it but at the end of the season I couldnt be too picky about what I got, plus my dealer maked me a killer deal. Anyway the boat has everything in place except for the pumps, pickup and the sac. Im going to use the same type of pumps that come stock from correct craft. I know Im going to have to drill a couple holes for the vent and overflow but that is no big deal. Plus im going to have to purchase a ball valve.
I want to use a soft sac in the center because putting a hard ballast tank would be a pain. What would everyone recommed going with. I have tried contacting lets go ride for a custom sac but I havent heard back from them.
One option I was playing around with was purchasing a jabsco pump and drilling a pick up in the transom to pump the water in and out of like the centurions do. (former centurion owner here) Not sure if this is the way to go though.
Any suggestions would be great.
I want to use a soft sac in the center because putting a hard ballast tank would be a pain. What would everyone recommed going with. I have tried contacting lets go ride for a custom sac but I havent heard back from them.
One option I was playing around with was purchasing a jabsco pump and drilling a pick up in the transom to pump the water in and out of like the centurions do. (former centurion owner here) Not sure if this is the way to go though.
Any suggestions would be great.
Comment