'08 ZR6 sometimes will just not run right when using ZO

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • Miljack
    1,000 Post Club Member
    • Dec 2004
    • 1616

    • Charlotte, NC

    • '08 230 TE ZR6

    '08 ZR6 sometimes will just not run right when using ZO

    Has anyone else noticed an occasional problem when using the ZO in wakeboarding mode? Mine will sometimes just not run, what I mean is if I have the speed set at 11.5mph or 22mph for wakeboarding, the boat will just not accelerate up to that speed, no matter how much throttle is provided. I've also noticed that when this happens, I'm seeing white vapor coming from the exhaust.
    It usually goes away, if I turn off all the power, and re-enter the keypad code, but it doesn't always fix the problem after the first attempt.
    To me it feels like the speed control for the throttle is telling the engine to not run that speed for some reason, maybe this is a known issue?
    2008 230 TE-ZR6
    1999 Pro Air Python-sold and moved away :-(
  • Miljack
    1,000 Post Club Member
    • Dec 2004
    • 1616

    • Charlotte, NC

    • '08 230 TE ZR6

    #2
    Nobody has noticed this with a Zero Off equiped boat/engine? My friend's '08 210/Excal did it once, but more along the lines it couldn't get a GPS signal...
    2008 230 TE-ZR6
    1999 Pro Air Python-sold and moved away :-(

    Comment

    Working...
    X