Tweet
We picked up the Faria replacement gauges for our '02 Air last fall. The boat was already in storage so I didn't get to put them in. Now I think we're going to order Perfect Pass. So, does anyone know if the paddle wheel that came with the Faria gauges will work with PP? The wires come out of the paddle wheel and feed up to the dash. The end is just bare wires no connector. If I need to, I know I can order PP with the paddle wheel and then order the 'Y' cable from Correct Craft. Thanks!
-
Jeff
---------------------------
2002 Air Nautique (DD)
GT-40
---------------------------- -
RE: paddle wheel
The kit should of came with a Perfect Pass jumper wire unless you bought the kit that was for (without PP).....?? Did you get instructions with your gauges? It seems like I would install the PP's paddle wheel and then just use this jumper wire that came with the kit. It would suck to get charged for that wire harness because if you bought the kit made for boats with PP it is actually cheaper!!! If you need the instructions let me know! -
RE: paddle wheel
We ordered the gauges for a boat without PP so it came with the paddle wheel but not the jumper/ 'y' cable. When we ordered we did not think we were getting PP. Really not a bad problem to have...we're getting PP! :grin:Jeff
---------------------------
2002 Air Nautique (DD)
GT-40
----------------------------Comment
-
RE: paddle wheel
I guess your only option is to go get the cable and use the PP paddle. It should work perfect. I'm going to be ordering PP also, as soon as I get my tax return back :grin:Comment
-
RE: paddle wheel
I talked with Eric at MidOhio and he did agree that I would need the other cable for the gauge and use the PP paddle wheel.
wake_fun:
I'd love the instructions! I don't have any and was going to have to track them down.Jeff
---------------------------
2002 Air Nautique (DD)
GT-40
----------------------------Comment
-
RE: paddle wheel
Check your email..........Comment
Comment