Keypad on 2010 230 falling out

[boatbuddy]

the keypad on our 230 has fallen out

it appears there should have been 2 screws put in at the factory to hold the ketpad secure which are not there

The cover plate glue has let go which was holding everything in place

anyone have any input prior to me installing these screws and re-attaching

any suggestions for type of glue to use

[Rick]

Use a light glue like a silicone calk. DON'T use 3M5500. You want to be able to get it off. The glue is actually just to keep it in place while you are putting the screws in.

[AirTool]

I was thinking the bezel had threaded studs and there are two wing nuts in the back. Maybe use lock tight or convert to SS nylok.

[robertsmcfarland]

Mine did the same thing, covered under warrity my dealer sent me a new metal ring which I put on my self two wing nuts hold it tight if my memory is correct